Click To Call(656) 254-1439Click To Get A Free Estimate
Paver pool deck with a screen cage beside a canal lot in Apollo Beach

Slip-aware sealing for canal and bayside pool decks

Pool Deck Paver Sealing in Apollo Beach, FL

Call (656) 254-1439 for a free estimate on your Apollo Beach pool deck, lanai and cage pavers.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.00 to $1.75 a sq ft to clean, sand and seal
Call Now(656) 254-1439
Pool decks

Can I get my Apollo Beach pool deck sealed, and how soon?

Yes, a local contractor can seal the pavers around your Apollo Beach, FL pool, and a callback arrives within 1 business day, often well before that. The estimate is free and carries no obligation. To start, call (656) 254-1439.

A pool deck takes more punishment than any other paved spot at the house: chlorinated splash, sunscreen, wet feet and a full afternoon of bay sun. Sealing slows the color loss, keeps green film from settling in and leaves the surface easier to rinse. Mention who swims, how often, and whether the deck stays wet most of the day when you ask for a free estimate.

Call (656) 254-1439

Service area

Which nearby areas can book pool deck sealing?

Estimates are open to pool homes in Apollo Beach and in every place listed below, from the Tampa Bay shoreline to the inland towns of Hillsborough County. Tap a name for notes about that area, or call (656) 254-1439 if your street is not listed.

Screened lanai with a freshly sealed paver deck and a pool in the afternoon light
Pool deck wear

Why does a pool deck in Apollo Beach turn green, chalky or crusty?

Several things work on the deck at once. Premier Pro Wash and Seal, a local company, puts Hillsborough County humidity at about 74 percent and says mold and algae can start on an untreated deck within 90 days. Add salt air off the bay, chlorinated splash and an afternoon storm, and the surface rarely stays dry long. To have a green deck looked at, call (656) 254-1439.

Wikipedia counts about 55 miles of canals in Apollo Beach and lists the elevation at 7 feet, so water is close to most lots. That is why a deck beside a canal can look different from one a few miles inland, even on the same street layout. If yours stays damp, mention it when you ask for a free estimate.

Salt deposits

A local paver company says salt water pools leave crusty deposits that are lifted during cleaning. Left in place, they sit under any coat that follows.

Chlorine and sunscreen film

Premier Pro Wash and Seal notes that chlorine and sunscreen oil need different chemistry than algae, so one cleaner does not cover everything.

Shade and cage damp

A screened enclosure keeps afternoon sun off part of the deck, and the shaded strip beside the cage wall is where algae shows first.

Joint sand washed out

Peters Pressure Washing, a local company, says afternoon storms flush joint sand, which lets pavers shift and weeds take hold.

Will sealing make my pool deck slippery?

It can if the finish is chosen badly. Unilock, a paver manufacturer, lists slip risk from high-gloss finishes as a drawback, and Alliance Gator, a sealer maker, says that maintaining slip resistance is an important consideration in any sealing project. A satin or matte finish stays closer to the traction of bare pavers. To talk through finishes, call (656) 254-1439.

A non-skid additive is another route. One Tampa Bay company lists a clear coating with a non-skid additive for pool decks, steps and entries. Another notes that very dense stone may need excess sealer wiped off to keep the surface from going slick. Ask the contractor for a small test patch and walk it wet before the whole deck is coated. To set that up, ask for a free estimate.

Which sealer finish suits a pool deck?

Rusty's Pro Wash and Seal, a Tampa Bay company, says its customers most often pick a high gloss for pool decks. That look is rich and wet, and it is also the one with the most slip risk. A mid sheen or a natural finish gives up some shine and keeps more grip underfoot. Decide with a barefoot walk in mind, then ask for a free estimate.

Water-based sealers give a lower gloss and clean up more easily, according to Unilock. Solvent-based sealers give higher gloss and deeper color. Penetrating sealers add no gloss at all, according to Alliance Gator. Which one fits depends on the stone, so have the contractor name the product and say why it was picked. To ask, call (656) 254-1439.

What should a pool deck quote cover around the cage and coping?

The edges are where a pool deck job goes wrong. Peters Pressure Washing says its crew cuts sealer in neatly at the pool coping and screen enclosure and protects nearby surfaces, and Unilock warns that sealer cannot be washed off once it lands on the wrong spot. Brickworks adds that pool-coping pavers should be dip sealed underneath. Ask how each edge will be handled when you ask for a free estimate.

Cage frame and screens

The aluminum and screens get covered or washed first so rinse water does not run onto a fresh coat.

Coping and waterline tile

Masking or a careful cut-in line keeps sealer off stone and tile that should stay uncoated.

Plants and pool equipment

Pump housings, planters and lights are covered, and sprinklers are shut off, since Unilock says water on a fresh coat can leave white marks.

Steps and entries

These get the most wet-foot traffic and are the spots to ask about extra traction.

Pricing

What does pool deck paver sealing cost in Apollo Beach?

No Apollo Beach company posts a pool deck price list, so the table below builds the estimate from rates three Tampa Bay paver companies publish per square foot for cleaning, joint sand and sealing. Rusty's Pro Wash and Seal lists $1.00 to $1.75, a second company lists $1.50 to $1.75, and a third lists $1.75 to $3.00 or more. Rusty's also lists typical pool deck and patio totals of $400 to $900 or more. For a number on your own deck, ask for a free estimate.

Deck size, the condition of the joints and the finish move the price most. Failed old sealer that has to be stripped, rust from sprinklers and a requested tint push it higher. To compare bids line by line, call (656) 254-1439.

Deck sizeTypical exampleAt $1.00 to $1.75 a sq ftAt $1.50 to $1.75 a sq ftAt $1.75 to $3.00 a sq ft
400 sq ftSmall lanai deck$400 to $700$600 to $700$700 to $1,200
700 sq ftPool and lanai$700 to $1,225$1,050 to $1,225$1,225 to $2,100
1,000 sq ftWrap-around deck and steps$1,000 to $1,750$1,500 to $1,750$1,750 to $3,000

Published Tampa Bay rates per square foot for cleaning, joint sand and sealing. Your contractor sets the real price after seeing the surface, and repairs, stripping and tinting are usually extra.

Get a Free Estimate

Contractor walking a homeowner around the edge of a pool cage to point out trouble spots

How often should a pool deck be resealed in Apollo Beach?

Plan on every two to five years, and nearer the short end beside the water. Premier Pro Wash and Seal says resealing about every 2 to 4 years fits the local climate, and Peters Pressure Washing says pool decks near the water lean toward the shorter side of its 3 to 5 year range. Belgard, a paver maker, also asks that sealer not go on more than once in three years. When splashed water stops beading, call (656) 254-1439.

Cleaning runs on a faster clock than sealing. Premier suggests washing a pool deck every 6 to 18 months, about every 12 for a shaded or heavily used deck and about every 18 for one in open sun. A cleaner deck is easier to read when it is time for the next coat. To plan both, ask for a free estimate.

My pool deck is travertine or porcelain. Is that handled the same way?

No. Travertine is a natural stone, and Premier keeps pressure under 1,000 PSI with pH-neutral solutions on it, while another local company uses low pressure and a breathable, stone-specific sealer. Porcelain is non-porous, and a local installer says that makes sealing unnecessary. Wrong sealer on the wrong stone can cloud or trap moisture. If your deck is stone, read the travertine sealing page and call (656) 254-1439.

What do Apollo Beach neighborhood associations expect on a deck?

Peters Pressure Washing says many Apollo Beach neighborhoods have architectural review, and that a clear seal rarely raises questions while a tint or color change can. A second company says communities may set rules on finishes, sand colors or work hours, and that color-enhancing or wet-look finishes are more likely to need approval. Check your rules before choosing a high gloss, then ask for a free estimate.

Ask the contractor for the product name and a written scope in case the association wants paperwork. Answers on that point show how organized the company is. For help, call (656) 254-1439.

Photos

How do sealed pool decks look around Apollo Beach?

Freshly sealed paver driveway beside a pool in the Apollo Beach area
Sealed paver pool deck beside a pool in the Apollo Beach area
Sealed paver patio behind the home beside a pool in the Apollo Beach area
Sealed paver walkway to a front door beside a pool in the Apollo Beach area
Close view of freshly sealed pavers beside a pool in the Apollo Beach area
Paver area with one cleaned half beside a dirty half beside a pool in the Apollo Beach area
Contractor cleaning pavers beside a pool in the Apollo Beach area
Contractor sealing or sanding pavers beside a pool in the Apollo Beach area
How it works

How does the pool deck sealing process work?

The pool deck sealing process runs in a set order, and skipping a step shows later as haze or peeling. The list below follows the order local companies describe. To get on the calendar, call (656) 254-1439.

1. Measure and inspect

The contractor notes the square footage, loose or sunken pavers, old sealer and any place water pools.

2. Cover and clean

Cage, equipment and plants are protected, then the deck is washed at a pressure the stone or paver can take.

3. Treat residue

Salt crust, sunscreen film, rust and algae each get a cleaner picked for that residue, tried on a small patch first.

4. Fill and dry

Joint sand goes back in after the surface dries. Premier allows 4 to 24 hours of drying after a wash.

5. Seal in thin coats

The finish is applied in even coats and cut in cleanly at coping and cage.

6. Cure and walk through

Sealer needs about 24 hours of dry weather, so the pool stays quiet while it sets. The contractor then tours the deck with you.

Questions

Frequently Asked Questions

How much does it cost to reseal a pool deck?

Tampa Bay paver companies publish rates from $1.00 up to $3.00 or more per square foot for cleaning and sealing, depending on the company, the condition and the finish. One of them lists typical pool deck totals of $400 to $900 or more. Stripping failed sealer or adding a tint raises the figure.

What type of pavers are best for a pool deck?

Travertine, porcelain and concrete pavers all get used. A local installer notes that travertine holds little heat and that porcelain does not absorb water, while premium concrete pavers run a little warmer. Whatever the material, the sealer has to be one made for it.

Which coating works for pool decks?

A breathable, water-based sealer in a low or mid sheen is the usual choice for pavers around a pool. A local company adds a non-skid additive on request for decks, steps and entries. Porcelain, which is non-porous, generally does not need a coat at all.

Which material suits a pool deck in Florida?

Pick a surface that stays cooler under bare feet and handles salt and humidity. Local installers point to travertine and porcelain for heat, and to sealed pavers for a lower price. Apollo Beach sits at 7 feet of elevation beside Tampa Bay, so salt exposure matters in the choice.

Will sealer make my Apollo Beach pool deck slippery?

A high gloss can, which is why Unilock lists slip risk as a drawback of glossy finishes. A satin or matte sealer, or a non-skid additive, keeps traction closer to the bare paver. Ask for a small test patch and walk it wet before the whole deck is coated.

Can the screen enclosure and pool deck be done in one visit?

Many local companies pair them, since the aluminum frame and screens collect the same green film. The sealing step comes last, after the deck has dried. Ask the contractor to list the order of work so rinse water from the cage does not land on a freshly coated deck.

Does salt water or chlorine change how a deck gets sealed?

Yes. A local company says salt water pools leave crusty deposits that have to come off during cleaning, and another notes that chlorine and sunscreen residue need different chemistry than algae. Each kind of residue is treated before any sealer goes down.

How long before the pool deck can be used after sealing?

Sealer needs about 24 hours of dry weather and up to 48 hours to fully cure, per Unilock and Brickworks. Foot traffic comes back sooner than furniture or a pool party, so ask for the exact times for the product used.

Ready to get the pool deck sorted?

Call or send the short form, and a local contractor replies within 1 business day, usually much sooner than that.

Call (656) 254-1439

Free, no obligation